Single end scalers are an excellent choice for pedodontic practices to remove deposits from supragingival surfaces and in orthodontic practices to remove cement. Single end scalers should be used when a double end instrument is not suitable or required.

Sickle N5 A moderate size, medium-reach sickle with a blade width of 0.9mm that tapers to a point.

Sickle 109 A moderate size, long-reach sickle with a blade width of 0.9 mm that tapers to a point.

Towner U15 A large size, long-reach sickle with a blade width of 1 mm that tapers to a point.

Ivory CI-1 A moderate size, medium-reach sickle with a blade width of 2 mm that tapers to a point.

Univ. of So. Cal. 128 A moderate size, medium-reach sickle on a straight shank with a blade width of 1.2 mm that tapers to a point.

Whiteside 2 A small size, short-reach sickle on a straght shank with a 1.5 mm blade that tapers to a point.

Jacquette J1S A small size, straight blade Jacquette with a 0.9 mm blade width that tapers to a point. This tip is also known as the Jacquette #33.

“B” Scaler A moderate size, straight blade with a 0.5 mm width that has two sharp edges on the face and the back of the blade. This enables the blade to be used in a push or pull stroke.

Nebraska 128 Thinner version of the USC128 with a blade width of 1mm.