Micromotor NM3000 handpiece 38 Variable footswitch 230V/50Hz
The field of application of the NM 3000 is quite large. It can be used for grinding, posishing, milling, drilling and so on. The NM 3000 motor system drives ether a motor with attached handpiece or a motor handpiece and it is characterized by a consistent power delivery in every speed range. The device is often used in Labs and in the cosmetic industrie and it known for its long product life, easy handling and its robust reliability.The device can be ordered with a On/Off pedal or with a Vario pedal. The maximum speed is presetted with the rotary button. This device can ether be used with a motor plus handpiece or a motor handpiece.
- Good price/performance ratio
- Compact and reliable
- Wide field of application
- Easy handling
- Powerful
- Low maintenance and long product life
TECHNICAL DATA
- Operating Voltage: 115/230 Volt at 50-60Hz
- Speed, Micro motor: 2000-35,000 rpm
- Motor: DC-Motor
- Dimensions, Control Unit (WxDxH): 100 x 170 x 95 mm
Includes:
- 1000:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1050nou Micromotor 31 redring 500 - 35´000 rpm
1 x 1055nou Handpiece 34 For micromotor 31/41
1 x 1488 Foot switch 32 On-Off for Micro Cut-Mat TCM 3000 -Endo / AF 30 , Disp. 2000 - 1001:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1050nou Micromotor 31 redring 500 - 35´000 rpm
1 x 1488 Foot switch 32 On-Off for Micro Cut-Mat TCM 3000 -Endo / AF 30 , Disp. 2000 - 1004:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1119nou Motorhandpiece 38 with cable 30´000 rpm
1 x 1488 Foot switch 32 On-Off for Micro Cut-Mat TCM 3000 -Endo / AF 30 , Disp. 2000 - 1007:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1050nou Micromotor 31 redring 500 - 35´000 rpm
1 x 1487 Variable pedal control for Micro-Cut / TCM 3 meters - 1010:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1119nou Motorhandpiece 38 with cable 30´000 rpm
1 x 1487 Variable pedal control for Micro-Cut / TCM 3 meters
The field of application of the NM 3000 is quite large. It can be used for grinding, posishing, milling, drilling and so on. The NM 3000 motor system drives ether a motor with attached handpiece or a motor handpiece and it is characterized by a consistent power delivery in every speed range. The device is often used in Labs and in the cosmetic industrie and it known for its long product life, easy handling and its robust reliability.The device can be ordered with a On/Off pedal or with a Vario pedal. The maximum speed is presetted with the rotary button. This device can ether be used with a motor plus handpiece or a motor handpiece.
- Good price/performance ratio
- Compact and reliable
- Wide field of application
- Easy handling
- Powerful
- Low maintenance and long product life
TECHNICAL DATA
- Operating Voltage: 115/230 Volt at 50-60Hz
- Speed, Micro motor: 2000-35,000 rpm
- Motor: DC-Motor
- Dimensions, Control Unit (WxDxH): 100 x 170 x 95 mm
Includes:
- 1000:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1050nou Micromotor 31 redring 500 - 35´000 rpm
1 x 1055nou Handpiece 34 For micromotor 31/41
1 x 1488 Foot switch 32 On-Off for Micro Cut-Mat TCM 3000 -Endo / AF 30 , Disp. 2000 - 1001:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1050nou Micromotor 31 redring 500 - 35´000 rpm
1 x 1488 Foot switch 32 On-Off for Micro Cut-Mat TCM 3000 -Endo / AF 30 , Disp. 2000 - 1004:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1119nou Motorhandpiece 38 with cable 30´000 rpm
1 x 1488 Foot switch 32 On-Off for Micro Cut-Mat TCM 3000 -Endo / AF 30 , Disp. 2000 - 1007:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1050nou Micromotor 31 redring 500 - 35´000 rpm
1 x 1487 Variable pedal control for Micro-Cut / TCM 3 meters - 1010:
1 x 1037d Electronic control unit NM3000 Vario/on-off 230V/50Hz
1 x 1119nou Motorhandpiece 38 with cable 30´000 rpm
1 x 1487 Variable pedal control for Micro-Cut / TCM 3 meters